Ferrofish A32pro Dante

Dual SFP Slots for MADI: Multimode or Singlemode SFP module as
default configuration, optional second SFP module optional

• 64 channels @32kHz, 44.1kHz, 48kHz
• 32 channels @64kHz, 88.2kHz, 96kHz
• 32 channels @128kHz, 176.4kHz, 192kHz*

* both MADI ports are used to achieve full 32+32 channel transmission
Support of MIDI over MADI.
Latency: 3 samples
Redundancy: Automatic switching between optical <-> coax MADI when signal lost.

Analog Inputs (AD)

Latest generation of Analog / Digital Converters from ESS Tech.

4 x DSub25  (Tascam format)

• Digital gain: +20dBu … -8 dBu, 1dB steps

OpAmps
OPA1604 / OPA1664

Level indicator
TFT screen, 28 levels

Analog Outputs (DA)

Latest generation of Digital / Analog Converters from ESS Tech.

4 x DSub25  (Tascam format)

• Digital gain: +20dBu … -8dBu, 1dB steps

OpAmps
OPA1604 / OPA1664

Level indicator
TFT screen, 28 levels

Headphones Out

• 2 x ¼” (6.3mm) TRS jack, stereo with HQ amp section and dedicated DAC path.
• Provides an independent stereo channel.
• Selectable mono/stereo or M/S decoded source of all inputs and outputs.
• Digitally controlled volume level.

ADAT I/O

4+4 optical interfaces (8 channels each with 48 kHz)

• 32 channels @32kHz, 44.1kHz, 48kHz
• 16 channels @64kHz, 88.2kHz, 96kHz
• n/a @128kHz, 176.4kHz, 192kHz

Latency: 3 samples

GPIO Port

• 4x General Purpose Inputs for switching Presets #1-4.
• 4x General Purpose Outputs for monitoring Lock/Power/MADI/Temp alerts.

MIDI I/O

• 2 x 1/8″ (3.5mm) TRS connector for remote control
• Conversion MIDI <> MIDI-over-MADI possible
• MIDI 2.0 pinout

Wordclock I/O

• BNC: 1 x input, 1 x output
• 75 Ohm Termination switchable for input

Power Supply

12V, 3A

• 2 x input jacks with screw lock for redundant power.
• Voltage supervision, warning message on screen when PSU input fails
• Internal resettable polyfuse
• 1 x Power Supply included, second PSU optional

USB Port

1 x USB 2.0 for Remote/Updates