Zum Hauptinhalt springen Zur Suche springen Zur Hauptnavigation springen

Schoeps V4 U g

Entdecken Sie das Schoeps V4 U g Studio Vocal Mikrofon: Perfekte Klangqualität, innovative Technik und klassisches Design für Ihre Studioaufnahmen.

Produktinformationen "Schoeps V4 U g"

  • Studio Vocal Microphone
  • New small-diaphragm capsule architecture, with bevelled collar for controlling the polar response.
  • Warm, clear sonic character with smoothly rolled-off diffuse-field response.
  • Capsule head with adjustable tilt angle.
  • Optimal on-axis frequency response featuring a mild high-frequency lift.
  • Very smooth polar response; carefully-controlled narrowing of the pattern at high frequencies.
  • Diffuse-field response parallel to the 0° response, with a gentle roll-off at high frequencies.
  • Newly designed electronics offer a very high maximum sound pressure level.

The V4 U is the studio vocal microphone by SCHOEPS. It unites the outstanding technical characteristics typical of SCHOEPS with a timeless, classic design.

The “look” of the V4 U is based on the SCHOEPS CM 51/3 from 1951. But the V4 U is a thoroughly modern studio microphone. Its capsule, circuitry and mechanical construction are the result of extensive new development.

THE CAPSULE

  • A 33-mm beveled collar causes the capsule’s directivity to increase steadily and smoothly at high frequencies, as in a largediaphragm microphone.
  • Meanwhile, the superior acoustic qualities of a small-diaphragm capsule like the extraordinarily smooth frequency and polar response are maintained.
  • The capsule is elastically suspended internally to reduce solid-borne sound such as handling noise.

THE ELECTRONICS

  • Newly-developed bridge-type balanced output circuit.
  • Maximum sound pressure level of 144 dB SPL, corresponding to an output level of 4.8 V.
  • Output stage transformerless and free of coupling capacitors.
  • The resulting output impedance is low and constant with frequency, while the symmetry is very high.
  • Symmetrical, balanced output, the entire audio circuit is symmetrical from the output of the FET onward.
  • High immunity to interference, with gapless shielding and a modern RFI filter at the output; very good electromagnetic compatibility.
Sicherheits- und Warnhinweise: Die spezifischen Sicherheitshinweise für das Produkt sind in dessen Bedienungsanleitung aufgeführt.

SCHOEPS

Schalltechnik Dr. Ing. Schoeps GmbH 

Spitalstr.20 76227 Karlsruhe Germany

info@schoeps.de

Alle Produkte im Shop
Pickup pattern
Cardioid
---
Frequency range
50 Hz - 22 kHz
---
Sensitivity
-36 dB (V/Pa), 16 mV/Pa
---
Equivalent noise level (A-weighted)
15 dB
---
Equivalent noise level (CCIR)
25 dB
---
Signal-to-noise ratio (A-weighted)
79 dB
---
Maximum sound pressure level (THD < 0.5 %)
144 dB-SPL
---
Maximum output voltage
4.8 V (13 dBV) with 1 kΩ load
---
Low cut filter
40 Hz, 18 dB/oct.
---
Minimum recommended load impedance
1 kΩ
---
Output impedance
50 Ω
---
Maximum cable length
> 300 m
---
SCHOEPS RFI Shield
Yes
---
Powering standard / Valid range
P 48 / >43 V
---
Current consumption
3.3 mA
---
Common mode rejection ratio (at 1 kHz)
> 80 dB
---
Output
XLR-3M, analog, 1 channel
---
Length
194 mm
---
Diameter
34 mm
---
Width of the capsule head
45 mm
---
Head swivel degree span
+/- 20°
---
Weight
302 g
---
Surface finish
blue, gray or custom color
Loading...
Dateien werden hochgeladen, bitte warten...