TAB Funkenwerk T67
120,00 €*
Verfügbarkeit: Bitte kontaktieren Sie uns in dringenden Fällen.
Produktinformationen "TAB Funkenwerk T67"
AMI designed transformer with simplified winding scheme of the historic BV12 transformer. Can be used as a cost effective alternate for applications needing a BV12. The T67 is a PCB mounted transformer with pins.
The circuit for the U67 is very unique compared to other microphones. The historic BV12 transformer is built very differently than your standard microphone output transformer. Designed with a Primary, Secondary and Feedback winding, the Feedback is a voltage sensing or feedback circuit that if engaged as an output by itself will cause the transformer to behave in a non-linear fashion. It is advised that one familiarize themselves with the technical aspects of a U67 before emarking on a DIY project.
The T67 provides the same flexibility as the BV12, the advantage being on a PCB board is that it is easier to make the necessary connections to utilize the T67. All of the windings are attached to pins and are essentially open loops. You must connect two Primary pins (and two Secondary and two Feedback) in order to create a loop with two terminals (see picture to left). Tying the Primary and Secondary together creates a 7:1 output ratio while tying the Primary to the Feedback creates a 22:1 output ratio.
| Sicherheits- und Warnhinweise: | Die spezifischen Sicherheitshinweise für das Produkt sind in dessen Bedienungsanleitung aufgeführt. |
|---|
TAB Funkenwerk
AMI/TAB-Funkenwerk
PO Box 351 18155 HWY 112 Clallam Bay, WA 98326
sales@tab-funkenwerk.com
- Ratio: P to S 7:1, P to F 22:1
- Impendance: 200Ohm
- Inductance: 473H
- Short Inductance: 40mH
- 20Hz-20kHz: +/-1dB
- Length: 1.50"
- Width: 1.39"
- Height (w/o pins): 1.05" (0.88")