It implements famous bus compressor design made with best components available on the market. Unit is fully compatible with GCon protocol which allows complete parameters management over USB or through open specification 500 series frame – _TITAN. Besides its vintage and transparent nature, unit itself implements many modern features which brings extreme flexibility to shape your sound – like parallel compression or configurable harmonic distortion. Features: famous bus compressor design with usage of best analogue components, compatible with GCon – innovative High-speed USB/Ethernet protocol, digitally controlled and isolated analog circuit direct USB connection to control analogue device with usage of VST2/VST3/AAX plugins. hardware A/B settings switch, digital sidechain – side chain signal can be sent from the plugin itself (DAW) to the compressor, 3 touch sensitive encoders allow record automation of particular parameters (Threshold, Mix, Make Up) in DAW, true bypass accurate analogue GR meter and its precise simulation implemented in the plug-in itself, THD – harmonic distortion with two modes (Medium & High), Mix knob which allows parallel compression, free software and firmware upgrades, +24dBu of headroom  

_CALYPSO is an audio interface designed to work in 500 series enclosure. It features state of art 8 channels of AD/DA conversion and perfectly integrates with ng500 chassis - _TITAN, through I.A.C. connector. Besides its very convenient integration with ng500 chassis, it still can be used in standard 500 series enclosure using two DB25 connectors. Features summary: 24bit conversion Supported sample rates: 44.1kHz, 48kHz, 88.2kHz(SMUX), 96kHz(SMUX) Ultra low jitter clock Word clock IN/OUT Full integration with _TITAN via IAC connector (Just ADAT cables are need to route signal to, and from chassis) Two DB25 connectors allows integration with any 500 series chassis Two converter reference levels +4dBu/-10dBV LCD screen with channels metering Specification: Inputs: Impedance - 10K THD+N - 105dBFS Maximum level - +24dBu Freq. response - 20Hz-20kHzm +/- 0.1dB Connector type - DB25/IAC Outputs: Impedance 100ohm THD+N - 103 dBFS Maximum level - +24dBu Freq. response - 20Hz-20kHzm +/- 0.1dB Connector type - DB25/IAC

_HYPERION is fully analog parametric EQ with +24dBu of headroom. It features a lot of innovative improvements that no other processor on the market provides. Its innovative design utilizes 15 VCAs per channel to provide essentially noiseless parameter changes and very musical nature. _HYPERION is next product in NG500 line where total recall is implemented through front panel USB socket or _TITAN chassis. Features: +24dBu of headroom Stereo / Dual mono / Mid/Side operation mode 4-Band EQ with switchable gain range for 5db or 15dB boost or cut per band: High band – 2kHz to 25kHz (bell or shelf) High-Mid band – 600Hz to 8Khz with full Q control Low-Mid band – 200Hz to 2.5Khz with full Q control Low band – 30 Hz to 350Hz (bell or shelf) HPF with 12dB/Oct or 6 dB/Oct slopes Each band features its own Bypass switch Essentially Noiseless parameter changes Proprietary THD implementation Flexible DAW/Live plug-in control for instant recall 12 touch sensitive encoders allows to record automation True bypass In and OUT metering with clip detection A/B compare feature

Feartures: world class compressor sound GCon – innovative High-speed USB/Ethernet protocol fully digitally controlled analog circuit Saturation Mode – special mode of operation which allows to saturate signal using gain staging between IN and OUT transformers fully balanced in/out by Carnhill transformers USB computer connection VST2/VST3/AAX/AAX DSP/AU (MAC/PC) control plugin dedicated stereo plugin to manage two devices integrated hardware A/B function digital sidechain from DAW to compressor 4  touch sensitive encoders (allow to record automation of all parameters to DAW in real time) true bypass selectable VU(in/out)/GR meter +24dBu of headroom

_TITAN is 500 series compatible rack frame which implements ng500 connector and GCon protocol. _TITAN is complete recall system designed to provide total integration with your beloved analogue equipment. It implements special connector which is part of new open standard “ng500” – “Next Generation 500 series” where modules can be designed to communicate with outside environment to support digital recall or any other vendor specific functionalities. “ng500” connector is compatible with most of standard 500 series modules* and allows total integration with GCon compatible modules. _TITAN supports USB connection, which can be used to directly connect workstation to your modules, and Ethernet connection where modules can be accessed through LAN network (currently only one subnet is supported). Documentation along with dedicated software framework (including high level API and firmware drivers) will be part of GCon open specification and each vendor can acquire it for free. Features: GCon compatible frame which allows to commnicate with modules through single connection. USB connection to manage up to 10 modules. Ethernet connection (UDP based) to manage up to 10 modules (LAN single subnet). GConManager application which allows to manage stereo links. Internal audio signals are routed into special connector (I.A.C. “Internal Audio Connector”) accessible on 10th slot, which allows integration with “Summing Modules” or “Audio interfaces”. Stereo links are integrated with modules, and pressing “Link” button on modules which supports GCon protocol (e.g. _Mimas) sets stereo link on the _Titan. Open Specification – documentation and software framework including communication drivers for any Vendor that would like to adopt to this standard. 10 slots with ng500 series connector. Remote firmware upgrade – _Titan & all modules inside can be upgraded remotely through USB or Ethernet connection. XLR sockets in/out for each slot. Internal stereo link switches which can be also managed through GConManager standalone application. Linear power supply capable to deliver 5A of power. Power mode switch – 115V/230V

Vollständig analoger, stereo-multiband-Kompressor mit digitalem Abruf. Seit Jahren werden Multiband-Kompressoren wegen ihrer Fähigkeit geschätzt, Dynamikbereiche über verschiedene Frequenzen präzise zu steuern und den Klang sowie Punch zahlloser ikonischer Produktionen zu formen. _Pandora bringt dies auf die nächste Stufe und bietet ein unvergleichliches analoges Kompressionserlebnis, nahtlos integriert mit modernem digitalem Abruf und Automatisierung. Mit präziser Multiband-Steuerung und intuitiver digitaler Benutzeroberfläche ist _Pandora auf dem besten Weg, ein Grundpfeiler in Studios weltweit zu werden – die perfekte Kombination aus analoger Wärme und zeitgemäßem Komfort. Erleben Sie die Zukunft der Kompression – die klassische Tiefe des analogen Sounds mit der Flexibilität und Kraft der digitalen Technologie, vereint in _Pandora.

Das _MIMAS Stereopaar bietet ein echtes Stereo-Kompressionserlebnis und gewährleistet präzise und konsistente Leistung über beide Kanäle. Dank der Dynamic Link Technologie werden die Sidechain-Signalpegel dynamisch über ein spezielles Potentiometer angepasst, wodurch Komponententoleranzen automatisch ausgeglichen werden. Dies gewährleistet eine perfekte Abstimmung zwischen beiden Einheiten und sorgt für eine präzise Stereoabbildung ohne unerwünschte Abweichungen.

Features: 100% analog microphone/line preamp with +28dBu of headroom. Class A fully analog – inspired by famous British design based on dual amp topology. Microphone gain up to 75dB. Carnhill Transformers (input and output). Output signal metering on the front panel with clip detection. Phantom power and phase invert control. Switchable impedance input (1200/300Ohm). All controls/analog settings are fully manageable via the WesAudio GCon DAW plug-in. 15dB OUTPUT PAD – passive output attenuation circuit with 1 dB step. (after the output transformer). Front panel XLR/TS socket which supports – HiZ instrument input (TS), line input (XLR), microphone input (XLR). Recallab

_PROMETHEUS is fully analog passive EQ with +24dBu of headroom. It features pultec-style warm sound with a lot of innovative improvements. Its modern approach to design allows instant recall of your classic vibe through very flexible plugin available in most common formats. _PROMETHEUS as all ng500 products, integrates with your DAW environment via front panel USB socket or _TITAN chassis. Features summary: +24dBu of headroom Stereo / Dual mono / Mid/Side operation mode Passive equalizer (Pultec-style) design Low frequency boost/cut – 20, 30, 60, 100, 120, 250 Hz. High frequency boost – 2, 3, 4, 5, 8, 10, 12, 16 kHz. High frequency cut – 4, 8, 12, 20 KHZ. Proprietary THD implementation Flexible DAW/Live plug-in control for instant recall 6 touch sensitive encoders allows to record automation True bypass In and OUT metering with clip detection A/B compare feature

Main features summary: 100% analog device with +24dBu of headroom True stereo tube “vari-mu” style compressor High voltage tube operation Input CARNHILL transformers Input and output level control for maximum flexibility Mix knob for parallel compression THD – harmonic distortion with two modes (Medium & High) SIDE CHAIN FILTERS – 3 high pass filters at 60,90 and 150 Hz 500 series and ng500 (e.g. _TITAN) series compatible Total Recall and plugin control compatible with most DAWs. Analog automation in DAW Other features: Fully digitally controlled and isolated analog circuit Digital recall can be achieved by connecting unit directlythrough front panel mini USB socket, or using it inside _TITAN chassis 4 touch sensitive encoders allow record automation of particularparameters (Threshold, Mix, Make Up) in DAW True bypass Accurate analogue GR meter and its precise simulation implemented in the plug-in itself Free software and firmware upgrades