Mesanovic Microphones

The CDM65 is a 3-way active DSP speaker designed for uncompromised performance and connectivity. It has the unique ability to upload various predefined tunings to the speaker such as the cardioid mode, which controls the directivity of the speaker down to 150Hz. The CDM65 can also receive wireless audio from any WiSA transmitter or from the Platin Stereo Hub. These features make the CDM65 a perfect fit for studio monitoring as well as home HiFi listening.

A new take on ribbon design The Model 2 is a ribbon microphone that pushes modern design to its limits. The Model 2 is a passive ribbon that is completely handcrafted in Detroit, Michigan. It features a 1.8 micron thick, 2 inch long pure aluminum ribbon. The ribbon motor was designed to have a very short front to back path length as well as custom resonator plates.  These features give the Model 2 an incredibly extended high frequency response, while retaining classic ribbon midrange and a rich, low end that reaches flat out to 20 Hz. You can hear the high frequency "air" in this microphone, something not common in ribbons. The Model 2 features our unique in house wound toroidal transformer. This transformer provides extremely low distortion, low noise, incredible high frequency detail, and a 3D like sound. The microphone's slim body (1.25 inches in diameter) allows it to be used with most third party shockmounts and allows for quick and easy set up. The Model 2 sounds great on all sources. Its smooth, flat extended response makes it an excellent choice on vocals, guitar amps, drums, strings, brass, piano, and much more. We recommend using this mic on sources where you would usually not reach for a ribbon, we guarantee you won't be disappointed. Like the Model 1, the Model 2 also delivers an amazingly quick transient response. We offer a lifetime warranty with our microphones because we are certain they are built for years of use. The microphone ships with a plastic carry case, mount clip, and protective pouch. Specifications: Directional Pattern: Bidirectional  Frequency Range: 20-20 kHz and beyond Sensitivity: -53.2 dB (2.2 mV/Pa) Noise Floor: <17 dBA Max SPL: 140dB SPL Output Impedance: 250 Ohms Ribbon Element: Material: Pure Aluminum Thickness: 1.8 microns Length: 2 in Width: 0.23 in Dimensions: Height: 7.4 in Diameter: 1.25 in Weight: 340 g

The active version of the Model 2 The Model 2A is an active version of the Model 2 ribbon microphone. The Model 2A utilizes the same design features found in the Model 2 and offers the same unique sonic character. The microphone contains our signature motor structure and custom designed resonator plates to provide the incredibly extended, detailed, and 3D like response found in our Model 2. The Model 2A’s high output is provided by a custom, in house wound, toroidal transformer. This high turn ratio transformer is perfectly matched to the Model 2A’s ribbon to provide optimal performance.  The phantom powered electronics work as an impedance buffer and provide no additional gain or coloration to the sound. The result of this ideal impedance matching is 13 dB more output than the Model 2 and extremely low self-noise. With its high output level, the Model 2A will work perfectly with any preamplifier. Whether you are using an entry-level interface or a high end dedicated preamp, the Model 2A will deliver stunning results. The Model 2A excels on quieter sources such as acoustic guitar, vocals, strings, and piano - yet still delivers beautifully on louder sources like guitar amps and drum overheads. The Model 2A also shines on location recordings of choirs and orchestras where low noise and high output is needed. The Model 2A is covered by a lifetime parts warranty and a free re-ribboning for the original owner within two years of purchase. The microphone ships with a plastic carry case, mount clip, and protective pouch. Specifications Directional Pattern: Bidirectional Frequency Range: 20-20kHz and beyond Sensitivity: -40.2 dB (9.8 mV/Pa) Self Noise: 11 dB(A) Max SPL: 140dB SPL Output Impedance: 170 Ohms​ Ribbon Element:  Material: Pure Aluminum Thickness: 1.8 microns Length: 2 in Width: 0.23 in Dimensions: Height: 7.4 in Diameter: 1.25 in Weight: 340g

Model 2 sound in a stereo package The Model 2S is a passive stereo ribbon microphone utilizing the same design features found in the Model 2. The Model 2S uses two matched ribbon motors angled at 90 degrees to each other to create a Blumlein configuration. It uses the same motors and transformers found in our Model 2. The motors feature a very short front to back path length along with our custom designed resonator plates. These features give the Model 2S the same unique sonic character found in our Model 2: an incredibly extended and detailed high end, classic smooth ribbon midrange, an open and transparent low end, and an amazingly quick transient response. A custom designed toroidal transformer provides extremely low distortion, low noise, and 3D like sound.  The Model 2S captures stunning stereo recordings with ease. Whether you are using the Model 2S in a Blumlein or M-S stereo configuration, the microphone's uniform polar frequency response and excellent off-axis frequency response will provide you with outstanding phase coherent stereo recordings. Solid phase compatibility between the two channels of the Model 2S also allows the user to combine the two channels into a mono recording without any phase artifacts. The microphones slim body and simple isolation mount make it easier than ever to position.  The beauty of the Model 2S is its ability to capture incredible 3D like recordings that will make you feel like you are in the room with the performers. Its beautifully balanced and extended frequency response greatly reduces the need for post equalization. The Model 2S shines on orchestral and choral recordings. It will have you hearing drum overheads and room recordings like never before. The Model 2S will easily become your favorite on string sections, horn sections, piano, acoustic guitar, and so much more.  The Model 2S is covered by a lifetime warranty on parts and a free re-ribboning for the original owner within two years of purchase. The microphone ships with a plastic carry case, mount clip, protective pouch, and a 5-pin XLR female to dual 3-pin XLR male breakout cable.  Specifications Directional Pattern: Dual Figure 8 Frequency Range: 20-20 kHz and beyond Sensitivity: -53.2 dB (2.2 mV/Pa) Noise Floor: <17 dBA Max SPL: 140dB SPL Output Impedance: 250 Ohms   Ribbon Element: Dual ribbons orientated at 90 degrees Material: Pure Aluminum Thickness: 1.8 microns Length: 2 in Width: 0.23 in   Dimensions: Height: 11.6 in Diameter: 1.25 in Weight: 540g

The RTM10 is a 3-way active DSP studio monitor. It features a frequency response ranging from 28Hz to 20kHz with incredibly low distortion, endless dynamic range, ultra fast transient response, and stunning stereo imaging. At the heart of the RTM10 is a pure aluminum ribbon tweeter, ultra low distortion aluminum mid range driver, and a high excursion aluminum subwoofer. Coupled with Hypex's latest NCore amplifiers and proprietary DSP, the RTM10 provides a sound stage that is unparalleled for its physical size.

The SC1 is our first small condenser microphone. It features an interchangeable capsule system and comes with matching omni and cardioid capsules. The SC1 is a transformerless design that offers low self noise, low distortion, ultra fast transient response, and a natural sonic character. The SC1 is precision machined from stainless steel and manufactured in our Detroit based facility. Each pair of capsules is matched for both sensitivity and frequency response in an ISO certified anechoic chamber. The SC1 works great for stereo recordings of drums, rooms, strings, orchestras, piano, and acoustic guitar. Its high SPL capability also makes the SC1 a great choice for snare drums, toms, and electric guitar cabs.