Other Accessories for Studio & Recording

AMS Neve Blank panel (each) Blank panel for 1081

Avalon PC-1 DetailsAvalon PC-1 Power Supply Cable for AD2000 SeriesFor more information, please visit this products webpage.

AVALON RM-1 Rackhalterung für Avalon 9,5' Geräte, z.B. M5 und U5 Größe: 19'/1HE  Für weitere Informationen, besuchen Sie bitte die Homepage zu diesem Produkt.

AVALON RM-2 19'- Rackhalterung 2HE für zwei Avalon 9,5' Geräte, z.B. M5 und U5 inkl. BefestigungsschraubenFür weitere Informationen, besuchen Sie bitte die Homepage zu diesem Produkt.

 Ersatzröhrenset für die VT 700 Serie 4x 6922 Röhren - matched  Für weitere Informationen, besuchen Sie bitte die Homepage zu diesem Produkt.

 Avalon VP-1 Details1U, 19-inch vent/space panel, ideal for cooling large racks. For more information, please visit this products webpage.

Don't take my funk for it, check it out, it's on the One! Bootsy baby!!!" Bootsy Collins"The BAE DI mod don't just funk around, pound for pound it has that funked up sound you've been droolin' for.Install a Jensen bass DI transformer in any BAE 19" rack-mounted "10 Series" Mic Pre or Mic Pre/EQ. Can be factory installed at time of order or retro fitted.

24V PSU Features Remote power supply with four-foot cable capable of four times the current needed by the preamps for optimum sound quality. Convertible to 230, 240, 100 and 220VAC The same hand-wired construction that BAE is known for. Four foot cable capable of four times the current needed by the preamps.

Bi Polar PSU FeaturesRemote power supply with four-foot cable capable of four times the current needed by the preamps for optimum sound quality. Convertible to 230, 240, 100 and 220VAC The same hand-wired construction that BAE is known for. Four foot cable capable of four times the current needed by the preamps.

The LS-4 is a small-footprint 2-in / 8-out line selector that can send the input signal to up to three other devices. The same signal can even be sent to all four destinations simultaneously, or in any combination. The LS-4 is fantastic as a passive monitor switcher, headphone signal distributor, or for parallel effects routing. Its 100% passive design prevents any sound coloration. An internal ground lift is also available for each channel.

At the heart of almost every optical compressor lies a T4b style Optocell. When designing the B172a compressor, Black Lion Audio tested every single readily available and boutique T4b one could get their hands on and found the options to be sorely lacking. Black Lion found that no available optocells were holding up to their rigorous testing nor did they deliver the “feel” and quality that one should expect from a Black Lion product. In Black Lion “mod” tradition, they designed their own: the T4BLA!

Timecode In - Out: Converts both standard and frame rate. Any combination of 23.97 : 24 : 24.97 : 25 : 29.97 : 30 supported.Timecode Standard/Framerate Converter Timecode Input any standard     24, 25(EBU), 30(SMPTE), DROP FRAME Timecode Output any standard     24, 25(EBU), 30(SMPTE), DROP FRAME Input : Output Frame Rate Gearbox     23.97 : 24 : 24.97 : 25 : 29.97 : 30 Switchable Timecode     Generator Lock Source Reader, Video RS232 Serial Interface     ASCII Protocol 6 Preset configurations     Easy Setup for Repeat Jobs Examples     The M & E track has been supplied with 29.97 fps SMPTE timecode and you are working with 25 fps EBU timecode.     You are dubbing the final mix to film at 24 fps and you are supplied with a dialogue tape recorded to 25fps Video.     The Timecode Gearbox may also be used to change standard/timecode value without gearbox action.     You are working with a system that does not recognise Drop frame code and you need to convert from Drop to Non Drop.     You have almost finished your Mix and a new video is supplied with a different timecode. The Synchronizer section of the TG-1 may be used to synchronize any non-linear VTR (V-Mod, V-1, Viper) or Dynamic scan VTR at a different frame rate.     You wish to prepare the music tracks for a 24fps film to a 25fps PAL video, you can use the TG-1 to slave the Video to 24fps so that there is no pitch shift on the final version.

Timecode In - Out: Converts both standard and frame rate. Any combination of 23.97 : 24 : 24.97 : 25 : 29.97 : 30 supported. Timecode Standard/Framerate Converter Timecode Input any standard     24, 25(EBU), 30(SMPTE), DROP FRAME Timecode Output any standard     24, 25(EBU), 30(SMPTE), DROP FRAME Input : Output Frame Rate Gearbox     23.97 : 24 : 24.97 : 25 : 29.97 : 30 Switchable Timecode     Generator Lock Source Reader, Video RS232 Serial Interface     ASCII Protocol 6 Preset configurations     Easy Setup for Repeat Jobs TG-2AS TG-1 but with RS422 In and Out:Use with standards converter for making copies or will also slave PAL video @ 24fps..The Timecode Gearbox is used whenever you have to mix code standards, normally because someone has supplied you with an Audio or Video and a different standard or Frame rate:- Examples     The M & E track has been supplied with 29.97 fps SMPTE timecode and you are working with 25 fps EBU timecode.     You are dubbing the final mix to film at 24 fps and you are supplied with a dialogue tape recorded to 25fps Video.     The Timecode Gearbox may also be used to change standard/timecode value without gearbox action.     You are working with a system that does not recognise Drop frame code and you need to convert from Drop to Non Drop.     You have almost finished your Mix and a new video is supplied with a different timecode. The Synchronizer section of the TG-1 may be used to synchronize any non-linear VTR (V-Mod, V-1, Viper) or Dynamic scan VTR at a different frame rate.     You wish to prepare the music tracks for a 24fps film to a 25fps PAL video, you can use the TG-1 to slave the Video to 24fps so that there is no pitch shift on the final version.  

XP-Relay32x to XP-Relay 64 Upgrade

We have always recommended that you provide at least one rack unit (RU) of space above and below our products. This is especially important for the more complex products like the VT-7 Compressor and the VT-5 Stereo Equalizer, which have many tubes and may generate considerable heat while operating. We have designed a 1.75 inch (1RU) ventilated rack panel that is coated with the same high-gloss polyurethane paint we use on all our products. The rack panel has a small D.W. Fearn logo and vacuum tube icon in the same gold that we use on the products. These panels are made of .25 inch laser-cut and milled aluminum.

Source Rack Kit

Box tray for mounting of up to 3 units of MA2CHBOX/EXBOX Series, 1 RU / 19"

Features: Bifilar Wound Isolation Transformer — This patented method of winding AC power transformers is the most accurate way known to achieve a near perfect balanced output.  The bifilar wound secondary is an exclusive Equi=Tech feature that raises the performance level of each of our products above all the rest.  To achieve peak performance in electronic components, a perfectly balanced AC supply is crucial.  Bifilar winding the output of our transformers achieves this near perfect mirror image symmetry.  Because every product offered by Equi=Tech is bifilar wound, every product provides a more effective and broader range of noise attenuation compared to any other balanced power product (typically >6dB gain better.)  This holds true in high resolution electronic components of all different shapes and sizes.  The result is improved signal, greater definition in video and greater detail in audio program material.  IT and other EDP systems also benefit from significantly fewer timing errors and higher throughput. High Power Factor — Regardless of how clean AC power provided for sensitive electronics may be, the instant that component power switches are turned on, the quality of AC power degenerates.  This is simply the nature of what are termed “non-linear reactive loads.”  When non-linear power supplies are energized, some measure of power is wasted and reflected back out onto the line.  This undesirable and noisy form of energy (harmonics) is then shared by every other component on the system.  Furthermore, voltage and current phases are knocked out of sync too and this is what is referred to as low power factor.  Electricity by its nature requires both current and voltage to be present at the same time or nothing happens.  In AC power, current and voltage must be timed together in sync or to the degree they are not, nothing happens.  As the power factor drops lower and lower, electricity thins out very much like cheaper gasoline and equipment performance suffers.  Generally speaking, the greater the load (e.g. large amplifiers) the lower the resulting power factor.  However, when this reflected energy flows back up the line into a balanced transformer, reactive currents will be flowing in opposite directions through identical mirror image output coils thereby creating equal but opposite electromagnetic forces that are present in the transformer in the same instant.  This causes the nuisance reflected energy (harmonics) to cancel out and literally disappear without bleeding back out onto the originating power grid.  Furthermore reactive load currents null (cancel out) electrically at the ground because harmonics on each side of the line are equal but opposite in polarity to each other – but not just opposite, precisely opposite thanks to bifilar winding.  This causes cancellation of all of the undesirable non-linear load harmonics on the load side of the transformer too.  What’s left?  Pure 60Hz AC once again with nothing remaining on the line to skew power factor; even the ground remains clean.  AC power remains as coherent and clean as it was originally provided before component switches were turned on.  Bifilar winding is the only way this undesirable non-linear event can be accurately addressed and its effects eliminated in real time as it happens.  The impact that this improved power stability and cleaner ground have on the performance of sensitive electronics is astonishing. Ultra Low Impedance — The ultra-low impedance design of the Model Q transformer provides unrestricted current delivery to its output and virtually busts the “myth” that transformers cannot handle high amplitude current transients demanded by amplifiers and other types of high current pulse loads.  Unlike typical transformers that are often considered to be “too current restricting” (and rightfully so,) Model Q transformers have been engineered with radical modifications made to their core and winding specifications which result in a transformer that has uncommonly low impedance and unrestricted current handling characteristics.  They provide instantaneous current response with the capacity to handle much larger current transients than any comparable solid state AC generator or inverter system. The amplitude of the current transients a Model Q transformer can easily accommodate would likely explode any similar solid state based device and it does this effortlessly with almost no measureable current sag.  In technical jargon, the magnetic flux density of its core operates at a fraction of its capacity thereby providing an extreme amount of current headroom with a magnetic current transfer hysteresis curve that is far more linear than anything similar to it, even when driven at or near its maximum continuous power rating.  It is virtually impossible detect any significant current sag or to drive a Model Q transformer into saturation.  Furthermore, the line-to-ground impedance on its output is only a fraction of the line-to-ground impedance found in similarly rated solid state systems.  This means that Model Q transformers attenuate a much wider bandwidth of non-linear reactive load harmonics (noise) than any comparable “low impedance” solid state AC generator or inverter. 100% Passive Circuitry — There are no active components used in any Equi=Tech product.  There is nothing that will degrade from heat over time or from years of rugged use.  Similar systems may use semiconductor devices to drive their outputs or soft start relays to compensate for a low quality isolation transformer with high inrush current — not ours!  There is nothing in an Equi=Tech system to wear out over time from heavy use or from heat.  We invest the cost of building our systems where it belongs, in well designed high quality components.  The next time you are watching a live broadcast of the Super Bowl or a Presidential Inauguration, remember that Equi=Tech is running the show because engineers know when equipment failure is not an option.  Ruggedness, reliability and the most refined balanced power technology on Earth is why top professionals choose Equi=Tech. High Efficiency — Equi=Tech systems are the most efficient of their kind.  This means that very little power is inefficiently wasted when powering electronic components.  Even when driven hard, they generate very little heat and they are barely warm to the touch.  They draw very little power in idle mode and can be left turned on indefinitely, ready to meet extreme power demands in an instant.  In operational mode, they waste almost no power drawing approximately what they put out.  With a typical 97%+ efficiency rating, they elegantly outperform similar power products and do it in a safe, economical and environmentally friendly way. Magnetic and Faraday Shielding — These indispensable features are included in every Equi=Tech product.  The Faraday shields isolate noise from the outside world as well as protect the system’s output and connected load components from potentially destructive voltage spikes. The magnetic shield assures that electronics used in close proximity will be unaffected by magnetic stray field radiation. Oxygen-free copper wire— Mil Spec. oxygen-free copper wire is used throughout the entire AC distribution section of every Model “Q”.  Hand-made OFC jumper wires and wiring harnesses are used exclusively in their assembly.  OFC wire reduces high frequency micro current distortion that is commonly present in conventional copper or silver wired circuits.  This further extends the effective bandwidth of noise attenuation. Filtered Digital Equipment Outlets — These outlets provide additional high frequency noise attenuation and isolation for switching power supplies typically found in digital electronics.  The outlets are intended for use with CD Players, DVD Players, Dish Receivers, Hi-Definition TV’s, DLP and Plasma Displays, automation controllers, computers and other high resolution electronic digital system components. Unswitched Outlet — An entire system of components can be turned on and off from the front panel by using the front standby switch(es).  As a convenience, one outlet on the back panel remains constantly turned on for equipment that uses a date/time clock such as TIVO’s, VCR’s, PVR’s, DVR’s and other components that require constant power to maintain volatile memory. Quality Tested — Equi=Tech products have been tested and certified to meet the most rigorous and demanding of all power industry standards for Class A (high voltage) power distribution equipment.  No one other than Equi=Tech offers a balanced power system that meets the design criteria and safety testing procedures required in this standard.  Since Equi=Tech started the balanced power revolution in the early 90’s, we remain the only balanced power manufacturer committed to meeting high performance and safety standards required by discriminating professionals in many technical fields.  Equi=Tech makes the only systems that meet stringent OSHA standards governing safety in the workplace.  Unlike some manufacturers, we cut no corners in the design and fabrication of our systems.  We regard electrical safety as seriously as we regard performance and we are willing to go the extra mile to prove it.  We are professionals who value our integrity and demonstrate it by the way we design and build our products. Lifetime Warranty — Only Equi=Tech offers a lifetime warranty on the most expensive component and heart of the system, the power isolation transformer.  We are so confident that our systems will last a lifetime, we offer this transformer replacement warranty for as long as the original chassis remains in tact; and it’s the only transferable warranty of its kind.  If for any reason (other than abuse) the transformer fails, we will replace it at our expense and charge only for nominal shipping and handling cost

Features: Bifilar Wound Isolation Transformer — This patented method of winding AC power transformers is the most accurate way known to achieve a near perfect balanced output.  The bifilar wound secondary is an exclusive Equi=Tech feature that raises the performance level of each of our products above all the rest.  To achieve peak performance in electronic components, a perfectly balanced AC supply is crucial.  Bifilar winding the output of our transformers achieves this near perfect mirror image symmetry.  Because every product offered by Equi=Tech is bifilar wound, every product provides a more effective and broader range of noise attenuation compared to any other balanced power product (typically >6dB gain better.)  This holds true in high resolution electronic components of all different shapes and sizes.  The result is improved signal, greater definition in video and greater detail in audio program material.  IT and other EDP systems also benefit from significantly fewer timing errors and higher throughput. High Power Factor — Regardless of how clean AC power provided for sensitive electronics may be, the instant that component power switches are turned on, the quality of AC power degenerates.  This is simply the nature of what are termed “non-linear reactive loads.”  When non-linear power supplies are energized, some measure of power is wasted and reflected back out onto the line.  This undesirable and noisy form of energy (harmonics) is then shared by every other component on the system.  Furthermore, voltage and current phases are knocked out of sync too and this is what is referred to as low power factor.  Electricity by its nature requires both current and voltage to be present at the same time or nothing happens.  In AC power, current and voltage must be timed together in sync or to the degree they are not, nothing happens.  As the power factor drops lower and lower, electricity thins out very much like cheaper gasoline and equipment performance suffers.  Generally speaking, the greater the load (e.g. large amplifiers) the lower the resulting power factor.  However, when this reflected energy flows back up the line into a balanced transformer, reactive currents will be flowing in opposite directions through identical mirror image output coils thereby creating equal but opposite electromagnetic forces that are present in the transformer in the same instant.  This causes the nuisance reflected energy (harmonics) to cancel out and literally disappear without bleeding back out onto the originating power grid.  Furthermore reactive load currents null (cancel out) electrically at the ground because harmonics on each side of the line are equal but opposite in polarity to each other – but not just opposite, precisely opposite thanks to bifilar winding.  This causes cancellation of all of the undesirable non-linear load harmonics on the load side of the transformer too.  What’s left?  Pure 60Hz AC once again with nothing remaining on the line to skew power factor; even the ground remains clean.  AC power remains as coherent and clean as it was originally provided before component switches were turned on.  Bifilar winding is the only way this undesirable non-linear event can be accurately addressed and its effects eliminated in real time as it happens.  The impact that this improved power stability and cleaner ground have on the performance of sensitive electronics is astonishing. Ultra Low Impedance — The ultra-low impedance design of the Model Q transformer provides unrestricted current delivery to its output and virtually busts the “myth” that transformers cannot handle high amplitude current transients demanded by amplifiers and other types of high current pulse loads.  Unlike typical transformers that are often considered to be “too current restricting” (and rightfully so,) Model Q transformers have been engineered with radical modifications made to their core and winding specifications which result in a transformer that has uncommonly low impedance and unrestricted current handling characteristics.  They provide instantaneous current response with the capacity to handle much larger current transients than any comparable solid state AC generator or inverter system. The amplitude of the current transients a Model Q transformer can easily accommodate would likely explode any similar solid state based device and it does this effortlessly with almost no measureable current sag.  In technical jargon, the magnetic flux density of its core operates at a fraction of its capacity thereby providing an extreme amount of current headroom with a magnetic current transfer hysteresis curve that is far more linear than anything similar to it, even when driven at or near its maximum continuous power rating.  It is virtually impossible detect any significant current sag or to drive a Model Q transformer into saturation.  Furthermore, the line-to-ground impedance on its output is only a fraction of the line-to-ground impedance found in similarly rated solid state systems.  This means that Model Q transformers attenuate a much wider bandwidth of non-linear reactive load harmonics (noise) than any comparable “low impedance” solid state AC generator or inverter. 100% Passive Circuitry — There are no active components used in any Equi=Tech product.  There is nothing that will degrade from heat over time or from years of rugged use.  Similar systems may use semiconductor devices to drive their outputs or soft start relays to compensate for a low quality isolation transformer with high inrush current — not ours!  There is nothing in an Equi=Tech system to wear out over time from heavy use or from heat.  We invest the cost of building our systems where it belongs, in well designed high quality components.  The next time you are watching a live broadcast of the Super Bowl or a Presidential Inauguration, remember that Equi=Tech is running the show because engineers know when equipment failure is not an option.  Ruggedness, reliability and the most refined balanced power technology on Earth is why top professionals choose Equi=Tech. High Efficiency — Equi=Tech systems are the most efficient of their kind.  This means that very little power is inefficiently wasted when powering electronic components.  Even when driven hard, they generate very little heat and they are barely warm to the touch.  They draw very little power in idle mode and can be left turned on indefinitely, ready to meet extreme power demands in an instant.  In operational mode, they waste almost no power drawing approximately what they put out.  With a typical 97%+ efficiency rating, they elegantly outperform similar power products and do it in a safe, economical and environmentally friendly way. Magnetic and Faraday Shielding — These indispensable features are included in every Equi=Tech product.  The Faraday shields isolate noise from the outside world as well as protect the system’s output and connected load components from potentially destructive voltage spikes. The magnetic shield assures that electronics used in close proximity will be unaffected by magnetic stray field radiation. Oxygen-free copper wire— Mil Spec. oxygen-free copper wire is used throughout the entire AC distribution section of every Model “Q”.  Hand-made OFC jumper wires and wiring harnesses are used exclusively in their assembly.  OFC wire reduces high frequency micro current distortion that is commonly present in conventional copper or silver wired circuits.  This further extends the effective bandwidth of noise attenuation. Filtered Digital Equipment Outlets — These outlets provide additional high frequency noise attenuation and isolation for switching power supplies typically found in digital electronics.  The outlets are intended for use with CD Players, DVD Players, Dish Receivers, Hi-Definition TV’s, DLP and Plasma Displays, automation controllers, computers and other high resolution electronic digital system components. Unswitched Outlet — An entire system of components can be turned on and off from the front panel by using the front standby switch(es).  As a convenience, one outlet on the back panel remains constantly turned on for equipment that uses a date/time clock such as TIVO’s, VCR’s, PVR’s, DVR’s and other components that require constant power to maintain volatile memory. Quality Tested — Equi=Tech products have been tested and certified to meet the most rigorous and demanding of all power industry standards for Class A (high voltage) power distribution equipment.  No one other than Equi=Tech offers a balanced power system that meets the design criteria and safety testing procedures required in this standard.  Since Equi=Tech started the balanced power revolution in the early 90’s, we remain the only balanced power manufacturer committed to meeting high performance and safety standards required by discriminating professionals in many technical fields.  Equi=Tech makes the only systems that meet stringent OSHA standards governing safety in the workplace.  Unlike some manufacturers, we cut no corners in the design and fabrication of our systems.  We regard electrical safety as seriously as we regard performance and we are willing to go the extra mile to prove it.  We are professionals who value our integrity and demonstrate it by the way we design and build our products. Lifetime Warranty — Only Equi=Tech offers a lifetime warranty on the most expensive component and heart of the system, the power isolation transformer.  We are so confident that our systems will last a lifetime, we offer this transformer replacement warranty for as long as the original chassis remains in tact; and it’s the only transferable warranty of its kind.  If for any reason (other than abuse) the transformer fails, we will replace it at our expense and charge only for nominal shipping and handling cost

Features: Bifilar Wound Isolation Transformer — This patented method of winding AC power transformers is the most accurate way known to achieve a near perfect balanced output.  The bifilar wound secondary is an exclusive Equi=Tech feature that raises the performance level of each of our products above all the rest.  To achieve peak performance in electronic components, a perfectly balanced AC supply is crucial.  Bifilar winding the output of our transformers achieves this near perfect mirror image symmetry.  Because every product offered by Equi=Tech is bifilar wound, every product provides a more effective and broader range of noise attenuation compared to any other balanced power product (typically >6dB gain better.)  This holds true in high resolution electronic components of all different shapes and sizes.  The result is improved signal, greater definition in video and greater detail in audio program material.  IT and other EDP systems also benefit from significantly fewer timing errors and higher throughput. High Power Factor — Regardless of how clean AC power provided for sensitive electronics may be, the instant that component power switches are turned on, the quality of AC power degenerates.  This is simply the nature of what are termed “non-linear reactive loads.”  When non-linear power supplies are energized, some measure of power is wasted and reflected back out onto the line.  This undesirable and noisy form of energy (harmonics) is then shared by every other component on the system.  Furthermore, voltage and current phases are knocked out of sync too and this is what is referred to as low power factor.  Electricity by its nature requires both current and voltage to be present at the same time or nothing happens.  In AC power, current and voltage must be timed together in sync or to the degree they are not, nothing happens.  As the power factor drops lower and lower, electricity thins out very much like cheaper gasoline and equipment performance suffers.  Generally speaking, the greater the load (e.g. large amplifiers) the lower the resulting power factor.  However, when this reflected energy flows back up the line into a balanced transformer, reactive currents will be flowing in opposite directions through identical mirror image output coils thereby creating equal but opposite electromagnetic forces that are present in the transformer in the same instant.  This causes the nuisance reflected energy (harmonics) to cancel out and literally disappear without bleeding back out onto the originating power grid.  Furthermore reactive load currents null (cancel out) electrically at the ground because harmonics on each side of the line are equal but opposite in polarity to each other – but not just opposite, precisely opposite thanks to bifilar winding.  This causes cancellation of all of the undesirable non-linear load harmonics on the load side of the transformer too.  What’s left?  Pure 60Hz AC once again with nothing remaining on the line to skew power factor; even the ground remains clean.  AC power remains as coherent and clean as it was originally provided before component switches were turned on.  Bifilar winding is the only way this undesirable non-linear event can be accurately addressed and its effects eliminated in real time as it happens.  The impact that this improved power stability and cleaner ground have on the performance of sensitive electronics is astonishing. Ultra Low Impedance — The ultra-low impedance design of the Model Q transformer provides unrestricted current delivery to its output and virtually busts the “myth” that transformers cannot handle high amplitude current transients demanded by amplifiers and other types of high current pulse loads.  Unlike typical transformers that are often considered to be “too current restricting” (and rightfully so,) Model Q transformers have been engineered with radical modifications made to their core and winding specifications which result in a transformer that has uncommonly low impedance and unrestricted current handling characteristics.  They provide instantaneous current response with the capacity to handle much larger current transients than any comparable solid state AC generator or inverter system. The amplitude of the current transients a Model Q transformer can easily accommodate would likely explode any similar solid state based device and it does this effortlessly with almost no measureable current sag.  In technical jargon, the magnetic flux density of its core operates at a fraction of its capacity thereby providing an extreme amount of current headroom with a magnetic current transfer hysteresis curve that is far more linear than anything similar to it, even when driven at or near its maximum continuous power rating.  It is virtually impossible detect any significant current sag or to drive a Model Q transformer into saturation.  Furthermore, the line-to-ground impedance on its output is only a fraction of the line-to-ground impedance found in similarly rated solid state systems.  This means that Model Q transformers attenuate a much wider bandwidth of non-linear reactive load harmonics (noise) than any comparable “low impedance” solid state AC generator or inverter. 100% Passive Circuitry — There are no active components used in any Equi=Tech product.  There is nothing that will degrade from heat over time or from years of rugged use.  Similar systems may use semiconductor devices to drive their outputs or soft start relays to compensate for a low quality isolation transformer with high inrush current — not ours!  There is nothing in an Equi=Tech system to wear out over time from heavy use or from heat.  We invest the cost of building our systems where it belongs, in well designed high quality components.  The next time you are watching a live broadcast of the Super Bowl or a Presidential Inauguration, remember that Equi=Tech is running the show because engineers know when equipment failure is not an option.  Ruggedness, reliability and the most refined balanced power technology on Earth is why top professionals choose Equi=Tech. High Efficiency — Equi=Tech systems are the most efficient of their kind.  This means that very little power is inefficiently wasted when powering electronic components.  Even when driven hard, they generate very little heat and they are barely warm to the touch.  They draw very little power in idle mode and can be left turned on indefinitely, ready to meet extreme power demands in an instant.  In operational mode, they waste almost no power drawing approximately what they put out.  With a typical 97%+ efficiency rating, they elegantly outperform similar power products and do it in a safe, economical and environmentally friendly way. Magnetic and Faraday Shielding — These indispensable features are included in every Equi=Tech product.  The Faraday shields isolate noise from the outside world as well as protect the system’s output and connected load components from potentially destructive voltage spikes. The magnetic shield assures that electronics used in close proximity will be unaffected by magnetic stray field radiation. Oxygen-free copper wire— Mil Spec. oxygen-free copper wire is used throughout the entire AC distribution section of every Model “Q”.  Hand-made OFC jumper wires and wiring harnesses are used exclusively in their assembly.  OFC wire reduces high frequency micro current distortion that is commonly present in conventional copper or silver wired circuits.  This further extends the effective bandwidth of noise attenuation. Filtered Digital Equipment Outlets — These outlets provide additional high frequency noise attenuation and isolation for switching power supplies typically found in digital electronics.  The outlets are intended for use with CD Players, DVD Players, Dish Receivers, Hi-Definition TV’s, DLP and Plasma Displays, automation controllers, computers and other high resolution electronic digital system components. Unswitched Outlet — An entire system of components can be turned on and off from the front panel by using the front standby switch(es).  As a convenience, one outlet on the back panel remains constantly turned on for equipment that uses a date/time clock such as TIVO’s, VCR’s, PVR’s, DVR’s and other components that require constant power to maintain volatile memory. Quality Tested — Equi=Tech products have been tested and certified to meet the most rigorous and demanding of all power industry standards for Class A (high voltage) power distribution equipment.  No one other than Equi=Tech offers a balanced power system that meets the design criteria and safety testing procedures required in this standard.  Since Equi=Tech started the balanced power revolution in the early 90’s, we remain the only balanced power manufacturer committed to meeting high performance and safety standards required by discriminating professionals in many technical fields.  Equi=Tech makes the only systems that meet stringent OSHA standards governing safety in the workplace.  Unlike some manufacturers, we cut no corners in the design and fabrication of our systems.  We regard electrical safety as seriously as we regard performance and we are willing to go the extra mile to prove it.  We are professionals who value our integrity and demonstrate it by the way we design and build our products. Lifetime Warranty — Only Equi=Tech offers a lifetime warranty on the most expensive component and heart of the system, the power isolation transformer.  We are so confident that our systems will last a lifetime, we offer this transformer replacement warranty for as long as the original chassis remains in tact; and it’s the only transferable warranty of its kind.  If for any reason (other than abuse) the transformer fails, we will replace it at our expense and charge only for nominal shipping and handling cost

Features: Bifilar Wound Isolation Transformer — This patented method of winding AC power transformers is the most accurate way of all to achieve a perfectly balanced output.  It is a feature that increases the performance of Equi=Tech products above all others.  Perfect balance is one of the most critical of all design specifications to consider when providing a balanced power system for sensitive electronics.  Because of this feature, Equi=Tech’s balanced power systems provide a wider bandwidth of noise attenuation than any other product in the marketplace.  To get the best performance from one’s electronics, a perfectly mirrored output stage is crucial.  This is especially true for today’s high resolution digital electronics.  The result is greater definition in video and smoother and more detailed highs in music without excessive sharpness or an annoying edge.  IT and other computer related systems benefit from this feature with faster throughput and fewer data errors. Magnetic and Faraday Shielding — These are expensive but worthwhile features built into every system we offer.  The shields work to eliminate noise from the outside world as well as to protect nearby electronics from magnetic stray field radiation.  Unlike similar products, Equi=Tech systems are safe to use near sensitive equipment. Highly Effective Redundant Surge Protection — A dual stage transient voltage surge suppressor (TVSS) is provided as a spike protection device rated at 240 joules.  But count on Equi=Tech to add a thoughtful extra touch to our products.  No surge suppressor made can be guaranteed to last forever.  All are designed to be sacrificed for the sake of protecting your equipment in extreme circumstances that do happen.  So unlike most other products in the marketplace, a useful status indicator light lets you know when your system has taken too many hits from nuisance voltage spikes and the time has come to replace the surge protection unit.  Though they typically last for many years, the surge module is easy and inexpensive to replace.  After all it’s better to know you have lost surge protection when it happens than to encounter a serious spike and lose your valuable components because of a worn out TVSS that you didn’t realize had already taken all it could handle.  But that’s not all that we provide.  As a redundant line of defense, grounded electrostatic shielding between the power transformer coils shunt dangerous voltage spikes, even huge spikes over several thousand volts for additional protection and piece of mind. Digital Equipment Outlets — These filtered outlets provide additional high frequency noise attenuation and isolation for switching power supplies found in typical digital electronics.  These outlets are designed for use with CD Players, DVD Players, DAT Players, Dish Receivers, Hi Definition Digital Television Receivers, Plasma Displays, automation controllers, computers and other high resolution digital electronics. Unswitched Outlet — An entire theater, audio system or data processing system can be turned off and on from the front panel by using the front standby switch.  As a convenience, one outlet on the back panel remains on all the time for equipment that uses a date/time clock such as TIVOs, VCRs, PVRs, DVRs or other components that require constant power for volatile memory. 100% Passive Circuitry — There are no active components used in our systems.  There is nothing that will burn out or degrade from heat over time or from years of rugged use.  Some systems you may encounter employ semiconductor devices to drive the outputs or soft-start relays to compensate for a low quality isolation transformer with high inrush current — not Equi=Tech!  There is simply nothing in our systems to wear out or degrade over time from heavy usage or from heat.  We invest money in our systems where it rightfully belongs, in well designed high quality components.  So the next time you are watching a live broadcast of the Super Bowl or Presidential Inauguration, keep in mind that Equi=Tech is there running the show because top engineers know that there are times when equipment failure is not an option.  Ruggedness, reliability and the most refined balanced power technology on Earth is why the top professionals in many technical fields choose Equi=Tech. High Efficiency — Our systems are the most efficient of their kind in the world.  This means that you waste no power running an Equi=Tech to drive your electronic components.  Even when they are driven hard, they generate very little heat.  Most of the time, they barely run warm.  They draw very little power in idle mode and can be left turned on practically forever, ready to meet the toughest power demands in an instant. In operational mode, they waste almost no electricity at all.  They draw about as much power as what they are asked to put out.  With a typical 97%+ efficiency rating, they easily outclass similar power products and do so in an elegant, safe and environmentally friendly way. Quality Tested — Equi=Tech products have been tested and certified to meet the most demanding and rigorous of all industry standards for Class A (high voltage) power distribution equipment.  No one other than Equi=Tech makes a balanced power systems that meets the design criteria and safety testing procedures required by this standard.  Since we initiated the balanced power revolution in the early 90’s we remain the only manufacturer of balanced power systems that is committed to meeting the high performance and safety standards required by professional engineers.  Equi=Tech makes the only systems that meet stringent OSHA standards governing safety in the workplace.  Not only do OSHA associates, engineers and inspectors approve our products, they have also been known to marvel at the excellence of their design and build.  Electricity can be a dangerous thing if there are undetected flaws in non listed equipment or equipment inspected to meet inappropriately low standards.   Unlike other manufacturers of balanced power products, we cut no corners in the design and fabrication of our systems.  As we should, we take electrical safety as seriously as performance and we go the extra mile to prove it.  We regard electrical safety as seriously as we regard performance and we are willing to go the extra mile to prove it.  We are professionals who value our integrity and demonstrate it by the way we design and build our products. We are professionals.  We are a company of conscientious people who value our integrity and demonstrate it by how we build what we sell.  Our products are the real deal in every imaginable way. Unlike some manufacturers, we cut no corners in the design and fabrication of our systems.

Features: Bifilar Wound Isolation Transformer — This patented method of winding AC power transformers is the most accurate way of all to achieve a perfectly balanced output.  It is a feature that increases the performance of Equi=Tech products above all others.  Perfect balance is one of the most critical of all design specifications to consider when providing a balanced power system for sensitive electronics.  Because of this feature, Equi=Tech’s balanced power systems provide a wider bandwidth of noise attenuation than any other product in the marketplace.  To get the best performance from one’s electronics, a perfectly mirrored output stage is crucial.  This is especially true for today’s high resolution digital electronics.  The result is greater definition in video and smoother and more detailed highs in music without excessive sharpness or an annoying edge.  IT and other computer related systems benefit from this feature with faster throughput and fewer data errors. Magnetic and Faraday Shielding — These are expensive but worthwhile features built into every system we offer.  The shields work to eliminate noise from the outside world as well as to protect nearby electronics from magnetic stray field radiation.  Unlike similar products, Equi=Tech systems are safe to use near sensitive equipment. Highly Effective Redundant Surge Protection — A dual stage transient voltage surge suppressor (TVSS) is provided as a spike protection device rated at 240 joules.  But count on Equi=Tech to add a thoughtful extra touch to our products.  No surge suppressor made can be guaranteed to last forever.  All are designed to be sacrificed for the sake of protecting your equipment in extreme circumstances that do happen.  So unlike most other products in the marketplace, a useful status indicator light lets you know when your system has taken too many hits from nuisance voltage spikes and the time has come to replace the surge protection unit.  Though they typically last for many years, the surge module is easy and inexpensive to replace.  After all it’s better to know you have lost surge protection when it happens than to encounter a serious spike and lose your valuable components because of a worn out TVSS that you didn’t realize had already taken all it could handle.  But that’s not all that we provide.  As a redundant line of defense, grounded electrostatic shielding between the power transformer coils shunt dangerous voltage spikes, even huge spikes over several thousand volts for additional protection and piece of mind. Digital Equipment Outlets — These filtered outlets provide additional high frequency noise attenuation and isolation for switching power supplies found in typical digital electronics.  These outlets are designed for use with CD Players, DVD Players, DAT Players, Dish Receivers, Hi Definition Digital Television Receivers, Plasma Displays, automation controllers, computers and other high resolution digital electronics. Unswitched Outlet — An entire theater, audio system or data processing system can be turned off and on from the front panel by using the front standby switch.  As a convenience, one outlet on the back panel remains on all the time for equipment that uses a date/time clock such as TIVOs, VCRs, PVRs, DVRs or other components that require constant power for volatile memory. 100% Passive Circuitry — There are no active components used in our systems.  There is nothing that will burn out or degrade from heat over time or from years of rugged use.  Some systems you may encounter employ semiconductor devices to drive the outputs or soft-start relays to compensate for a low quality isolation transformer with high inrush current — not Equi=Tech!  There is simply nothing in our systems to wear out or degrade over time from heavy usage or from heat.  We invest money in our systems where it rightfully belongs, in well designed high quality components.  So the next time you are watching a live broadcast of the Super Bowl or Presidential Inauguration, keep in mind that Equi=Tech is there running the show because top engineers know that there are times when equipment failure is not an option.  Ruggedness, reliability and the most refined balanced power technology on Earth is why the top professionals in many technical fields choose Equi=Tech. High Efficiency — Our systems are the most efficient of their kind in the world.  This means that you waste no power running an Equi=Tech to drive your electronic components.  Even when they are driven hard, they generate very little heat.  Most of the time, they barely run warm.  They draw very little power in idle mode and can be left turned on practically forever, ready to meet the toughest power demands in an instant. In operational mode, they waste almost no electricity at all.  They draw about as much power as what they are asked to put out.  With a typical 97%+ efficiency rating, they easily outclass similar power products and do so in an elegant, safe and environmentally friendly way. Quality Tested — Equi=Tech products have been tested and certified to meet the most demanding and rigorous of all industry standards for Class A (high voltage) power distribution equipment.  No one other than Equi=Tech makes a balanced power systems that meets the design criteria and safety testing procedures required by this standard.  Since we initiated the balanced power revolution in the early 90’s we remain the only manufacturer of balanced power systems that is committed to meeting the high performance and safety standards required by professional engineers.  Equi=Tech makes the only systems that meet stringent OSHA standards governing safety in the workplace.  Not only do OSHA associates, engineers and inspectors approve our products, they have also been known to marvel at the excellence of their design and build.  Electricity can be a dangerous thing if there are undetected flaws in non listed equipment or equipment inspected to meet inappropriately low standards.   Unlike other manufacturers of balanced power products, we cut no corners in the design and fabrication of our systems.  As we should, we take electrical safety as seriously as performance and we go the extra mile to prove it.  We regard electrical safety as seriously as we regard performance and we are willing to go the extra mile to prove it.  We are professionals who value our integrity and demonstrate it by the way we design and build our products. We are professionals.  We are a company of conscientious people who value our integrity and demonstrate it by how we build what we sell.  Our products are the real deal in every imaginable way. Unlike some manufacturers, we cut no corners in the design and fabrication of our systems.

Features: Bifilar Wound Isolation Transformer — This patented method of winding AC power transformers is the most accurate way of all to achieve a perfectly balanced output.  It is a feature that increases the performance of Equi=Tech products above all others.  Perfect balance is one of the most critical of all design specifications to consider when providing a balanced power system for sensitive electronics.  Because of this feature, Equi=Tech’s balanced power systems provide a wider bandwidth of noise attenuation than any other product in the marketplace.  To get the best performance from one’s electronics, a perfectly mirrored output stage is crucial.  This is especially true for today’s high resolution digital electronics.  The result is greater definition in video and smoother and more detailed highs in music without excessive sharpness or an annoying edge.  IT and other computer related systems benefit from this feature with faster throughput and fewer data errors. Magnetic and Faraday Shielding — These are expensive but worthwhile features built into every system we offer.  The shields work to eliminate noise from the outside world as well as to protect nearby electronics from magnetic stray field radiation.  Unlike similar products, Equi=Tech systems are safe to use near sensitive equipment. Highly Effective Redundant Surge Protection — A dual stage transient voltage surge suppressor (TVSS) is provided as a spike protection device rated at 240 joules.  But count on Equi=Tech to add a thoughtful extra touch to our products.  No surge suppressor made can be guaranteed to last forever.  All are designed to be sacrificed for the sake of protecting your equipment in extreme circumstances that do happen.  So unlike most other products in the marketplace, a useful status indicator light lets you know when your system has taken too many hits from nuisance voltage spikes and the time has come to replace the surge protection unit.  Though they typically last for many years, the surge module is easy and inexpensive to replace.  After all it’s better to know you have lost surge protection when it happens than to encounter a serious spike and lose your valuable components because of a worn out TVSS that you didn’t realize had already taken all it could handle.  But that’s not all that we provide.  As a redundant line of defense, grounded electrostatic shielding between the power transformer coils shunt dangerous voltage spikes, even huge spikes over several thousand volts for additional protection and piece of mind. Digital Equipment Outlets — These filtered outlets provide additional high frequency noise attenuation and isolation for switching power supplies found in typical digital electronics.  These outlets are designed for use with CD Players, DVD Players, DAT Players, Dish Receivers, Hi Definition Digital Television Receivers, Plasma Displays, automation controllers, computers and other high resolution digital electronics. Unswitched Outlet — An entire theater, audio system or data processing system can be turned off and on from the front panel by using the front standby switch.  As a convenience, one outlet on the back panel remains on all the time for equipment that uses a date/time clock such as TIVOs, VCRs, PVRs, DVRs or other components that require constant power for volatile memory. 100% Passive Circuitry — There are no active components used in our systems.  There is nothing that will burn out or degrade from heat over time or from years of rugged use.  Some systems you may encounter employ semiconductor devices to drive the outputs or soft-start relays to compensate for a low quality isolation transformer with high inrush current — not Equi=Tech!  There is simply nothing in our systems to wear out or degrade over time from heavy usage or from heat.  We invest money in our systems where it rightfully belongs, in well designed high quality components.  So the next time you are watching a live broadcast of the Super Bowl or Presidential Inauguration, keep in mind that Equi=Tech is there running the show because top engineers know that there are times when equipment failure is not an option.  Ruggedness, reliability and the most refined balanced power technology on Earth is why the top professionals in many technical fields choose Equi=Tech. High Efficiency — Our systems are the most efficient of their kind in the world.  This means that you waste no power running an Equi=Tech to drive your electronic components.  Even when they are driven hard, they generate very little heat.  Most of the time, they barely run warm.  They draw very little power in idle mode and can be left turned on practically forever, ready to meet the toughest power demands in an instant. In operational mode, they waste almost no electricity at all.  They draw about as much power as what they are asked to put out.  With a typical 97%+ efficiency rating, they easily outclass similar power products and do so in an elegant, safe and environmentally friendly way. Quality Tested — Equi=Tech products have been tested and certified to meet the most demanding and rigorous of all industry standards for Class A (high voltage) power distribution equipment.  No one other than Equi=Tech makes a balanced power systems that meets the design criteria and safety testing procedures required by this standard.  Since we initiated the balanced power revolution in the early 90’s we remain the only manufacturer of balanced power systems that is committed to meeting the high performance and safety standards required by professional engineers.  Equi=Tech makes the only systems that meet stringent OSHA standards governing safety in the workplace.  Not only do OSHA associates, engineers and inspectors approve our products, they have also been known to marvel at the excellence of their design and build.  Electricity can be a dangerous thing if there are undetected flaws in non listed equipment or equipment inspected to meet inappropriately low standards.   Unlike other manufacturers of balanced power products, we cut no corners in the design and fabrication of our systems.  As we should, we take electrical safety as seriously as performance and we go the extra mile to prove it.  We regard electrical safety as seriously as we regard performance and we are willing to go the extra mile to prove it.  We are professionals who value our integrity and demonstrate it by the way we design and build our products. We are professionals.  We are a company of conscientious people who value our integrity and demonstrate it by how we build what we sell.  Our products are the real deal in every imaginable way. Unlike some manufacturers, we cut no corners in the design and fabrication of our systems.

Working with 4ms, Eventide is able to offer a low-cost, portable, compact enclosure that turns the Misha eurorack module into a table-top instrument. The POD32E is 32HP with 1.3" (33mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. Works with Eventide 18V/36W Universal Power Wall Wart