Sennheiser
Passive omni-directional antenna. Transmitting and receiving antenna for frequencies between 450 and 960 MHz.
The A 3700 is an active broadband omnidirectional antenna with an integrated antenna amplifier AB 3700. The antenna is suitable for all devices in the EM3731/3732 series as well as for the EM2000/2050 receivers. The use of the A 3700 improves transmission reliability in multi-channel systems.
The A 5000-CP passive antenna provides an optimum solution for both transmitting and receiving RF signals throughout the UHF spectrum. Installations have demonstrated that the circular polarization of this antenna minimizes variations in signal strength and almost eliminates multipath problems, a primary cause dropouts. The gain of this antenna over the entire UHF band is superior to common `off the shelf' antennas. The wideband design (450-960MHz) of the A 5000-CP allows it to accommodate antenna distribution systems for either wireless monitors or wireless microphones across multiple frequency ranges, offering maximum flexibility when designing complex RF systems.
The AB 3700 is a broadband antenna amplifier with a four-stage adjustable gain of up to 15 dB to compensate for cable attenuation. The antenna amplifier is already integrated into the broadband antennas A 3700 (omnidirectional) and AD 3700 (directional) and is designed to improve transmission reliability in multi-channel systems.
The AB 4 is a filtered, inline antenna booster module with BNC connectors, designed to offer typ. +12dB of boost to compensate for signal losses created by long antenna cable runs.The AB 4 is fully compatible with all legacy evolution wireless systems. Additionally, the AB 4's filters have been expanded to support the bandwiths up to 88 Mhz.
The AB 4 is a filtered, inline antenna booster module with BNC connectors, designed to offer typ. +12dB of boost to compensate for signal losses created by long antenna cable runs.The AB 4 is fully compatible with all legacy evolution wireless systems. Additionally, the AB 4's filters have been expanded to support the bandwiths up to 88 Mhz.
The AB 4 is a filtered, inline antenna booster module with BNC connectors, designed to offer typ. +12dB of boost to compensate for signal losses created by long antenna cable runs.The AB 4 is fully compatible with all legacy evolution wireless systems. Additionally, the AB 4's filters have been expanded to support the bandwiths up to 88 Mhz.
The AB 4 is a filtered, inline antenna booster module with BNC connectors, designed to offer typ. +12dB of boost to compensate for signal losses created by long antenna cable runs.The AB 4 is fully compatible with all legacy evolution wireless systems. Additionally, the AB 4's filters have been expanded to support the bandwiths up to 88 Mhz.
The AB 4 is a filtered, inline antenna booster module with BNC connectors, designed to offer typ. +12dB of boost to compensate for signal losses created by long antenna cable runs.The AB 4 is fully compatible with all legacy evolution wireless systems. Additionally, the AB 4's filters have been expanded to support the bandwiths up to 88 Mhz.
The AC 3200-II is an active 8-channel transmitter combiner for bundling the antenna signals in large wireless monitoring systems. Designed for the 2000 Series rack-mount monitor transmitters, it is ideal for large productions where reliable transmission and long reach are key. The AC 3200-II allows up to eight signals to be transmitted from a single antenna. In multi-channel systems it is an indispensable tool for efficiently reducing intermodulation between transmission channels. Linear power amplifiers handle up to 100 mW per channel without loss, and LEDs for each channel provide the user with a reliable system overview.
Active antenna combiner for evolution wireless G4 systems. The AC 41 operates up to four wireless stereo transmitters from the ew series using one shared antenna. Power is supplied to the SR IEM G4 transmitters over the BNC cables via NT 3-1 power supply (included with the AC 41), making separate power supplies for the transmitters obsolete.
Directional antenna with integrated AB3700 for for EM 3731/3732, EM 2000/2050 and EM 6000 receivers only.
The new dimension of VR audio productions. With the easy to handle AMBEO VR Mic you are able to record high-quality VR sound from just one single point. Bringing your listeners a whole new and highly emotional experience.
Passive antenna splitter 2 x 1 : 2 (ASP 212) or passive antenna splitter 1 x 1 : 3 (ASP 113) and passive antenna splitter 1 x 1 : 4 (ASP 114). DC-coupled for use with antenna boosters. Special version with powering also available for using A 12 antennas with EM 3031/32 receivers.
Passive antenna splitter 2 x 1 : 2 (ASP 212) or passive antenna splitter 1 x 1 : 3 (ASP 113) and passive antenna splitter 1 x 1 : 4 (ASP 114). DC-coupled for use with antenna boosters. Special version with powering also available for using A 12 antennas with EM 3031/32 receivers.
The three EM 1046 ASP antenna splitter modules serve to supply several mainframes with the signals of only two antenna. With an EM 1046 ASP 212, a 16-channel system can be operated with only one pair of antenna.
With the AWM 4, the antennas can be installed in an optimum way and nearly invisible, in case the stationary receiver shall be invisible or needs to be further away. It can be easily mounted on a mobile microphone tripod or permanently installed on a wall.
Overview The MAT 133-S is a rugged and unobtrusively designed table stand. It provides a stable ground for the metal gooseneck MZH 3015 with a length of 150 mm for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged gooseneck is fitted with a balanced, floating XLR-3 output, enabling the microphone to be powered by the SL DI 4 XLR.The ME 36 is a condenser microphone capsule. This mini shotgun microphone features for an outstanding background noise rejection.The SL DI 4 XLR four input Dante-preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR. Features Highest speech-intelliibility Phantom power via PoE Remote controllable gain level Daisy-chaining possible What's in the box? 1 SLDI 4 XLR 4 MAT 133-S 4 MZH 3015 4 ME 36
Overview The MEB 114-S is a sturdy on-table boundary layer microphone that constitutes an improvement for any conferencing system. It features a programmable microphone button and a bi-color LED ring for status indication. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114-S ensures the best speech intelligibility.The SL DI 4 XLR four input Dante™ preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante™ system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR. Features Great speech-intelliibility Phantom power via PoE Remote controllable gain level Daisy-chaining possible What's in the box? 1 SLDI 4 XLR 4 MEB 114-S
Overview: The MAT 133-S with the MEG 14-40 is as versatile as it is easy to operate. Experience clearly structured meetings and discussions as the intuitive handling will lead the focus on the content – not the technology. The proven Sennheiser KE 10 capsule provides best speech intelligibility.Powered by the SL DI 4 XLR with just a standard XLR 3 cable, the microphone is integrated in a bigger setup with a finger snap and makes even spontaneous discussion setups possible.The SL DI 4 XLR four input Dante™ preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante™ system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR. Features: Great speech-intellibility Phantom power via PoE Remote controllable gain level Daisy-chaining possible What's in the box? 1 SL DI 4 XLR 4 MAT 133-S 4 MEG 14-40
Overview The MAT 133-S with the MEG 14-40 is as versatile as it is easy to operate. Experience clearly structured meetings and discussions as the intuitive handling will lead the focus on the content – not the technology. The proven Sennheiser KE 10 capsule provides best speech intelligibility.Powered by the SL DI 4 XLR with just a standard XLR 3 cable, the microphone is integrated in a bigger setup with a finger snap and makes even spontaneous discussion setups possible.The SL DI 4 XLR four input Dante™ preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante™ system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR. Features Great speech-intellibility Phantom power via PoE Remote controllable gain level Daisy-chaining possible What's in the box? 1 SL DI 4 XLR 4 MAT 133-S 4 MEG 14-40
Sennheiser E602 IIThe e 602 II is a cardioid instrument microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.Features: Rugged, lightweight aluminium body for stable positioning on long microphone boom arms Lightweight high-performance voice coil construction Fast transient response Low frequency extension Ideal for direct use on the most problematic bass signal Frequency-independent directivity provides isolation from other on-stage signals Humbucking coil Integral stand mountIncludes: 1 e 602-II 1 pouch Instructions for useTechnical Specifications:Transducer principle (Microphone) dynamicPick-up pattern cardioidFrequency response 20.....16000 HzSensitivity in free field, no load (1kHz) 0,25 mV/Pa; (50 Hz) 0,9 mV/PaNominal impedance 350 OhmMin. terminating impedance 1000 OhmConnector XLR-3Dimensions d 60 x 153 mmWeight 318 g